JVC MXDVA5 Instructions - Page 84
To turn on or off Daily Timer after its setting is done, How Recording Timer actually works
UPC - 046838257124
View all JVC MXDVA5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
English 6 When you have selected PRESET Using Recording Timer NEXT "TUNER FM" or PREV. "TUNER AM" in step 5, With Recording Timer, you can make a tape of a radio select a preset station broadcast automatically. You can set the timer whether the number. unit is on or off. Press 4 or ¢ to select the preset station number, then press SET. SET The unit enters volume setting mode. How Recording Timer actually works The unit automatically turns on, tunes into the specified station, sets the volume level to "VOL MIN," and starts recording when the on-time comes (the indicator flashes 7 Press 4 or ¢ to set the PRESET volume level. PREV. • You can select the volume level from VOL MIN, VOL 1 - VOL 30, and VOL MAX. while the timer is operating). Then, when the off-time comes, NEXT the unit automatically turns off (stands by). Recording Timer works only once, but the timer setting remains in memory until you change it. • There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again. • If you have made a mistake while setting the timer, press CANCEL/DEMO. (However, this does not always work. If CANCEL/DEMO does not work, press CLOCK/TIMER repeatedly and start from step 2 again.) 8 Press SET to complete the Daily SET Timer setting. The DAILY (daily timer) indicator stops flashing and remains lit. The settings you have done are shown on the display in sequence for your confirmation. 9 Press STANDBY/ON to turn off the unit (on standby) STANDBY STANDBY/ON if you have set the Daily Timer with the unit turned on. On the unit ONLY: 1 Put a recordable cassette into deck B. 2 Press CLOCK/TIMER repeatedly CLOCK / TIMER until "REC" appears on the display. The indicator lights up and the REC (recording timer) indicator also starts flashing on the display. If the unit is turned on when the timer-on time comes Daily Timer does not work. To turn on or off Daily Timer after its setting is done 1 Press CLOCK/TIMER repeatedly until CLOCK / TIMER "DAILY" appears on the display. 2 To turn off the Daily Timer, press CANCEL/ DEMO. CANCEL The DAILY (daily timer) indicator goes off /DEMO from the display ("OFF" appears for a while). The Daily Timer is canceled, but the setting for the Daily Timer remains in memory. SET To turn on the Daily Timer, press SET. The DAILY (daily timer) indicator lights up on the display. The settings you have done are shown on the display in sequence for your confirmation. • Each time you press the button, the timer setting modes change as follows: DAILY ON TIME REC Canceled CLOCK ON TIME (See page 10.) 3 Press CLOCK/TIMER again. CLOCK / TIMER "ON TIME" appears for 2 seconds, then the unit enters on-time setting mode. - 35 -