JVC TK-C553U Instruction Manual - Page 16
Connections to Camera Terminal Board Continued
View all JVC TK-C553U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
INSTALLATION Connections to Camera Terminal Board (Continued) Meshed wire 12mm Polyethylene Core conductor 6mm Fold the meshed wire back. Ⅲ Video signal cables Connect the coaxial cables to the video signal output terminals. Treat the tips of the coaxial cables as shown on the left before connection. Note Use the 3C-2V or 5C-2V video signal cable (coaxial cable). The 7C-2V cannot be used. A TX+ B TX- C RX+ D RX- Connect to the other side in pairs like this. Connect to the other side in pairs like this. Ⅲ Control signal cables These cables should be connected only when it is required to control the camera using the RS-442A or RS-485 signals. The use of 0.65 4-conductor twisted pair cables is recommended. With these cables, the maximum extension distance is 1,200 m. After having connected all of the required cables, again attach the terminal board cover. Forgetting to attach the terminal board cover could result in accidents or injuries. 16