JVC TK-C553U Instruction Manual - Page 32

SETUP MENU BLC (Back Light Compensation) Adjustment MONITOR LOCK LEFT AWC INT OFF TERMINATION UP RIGHT SET NOT USED NOT USED L/L ON DOWN LOCK screw LEFT button UP button SET button RIGHT button DOWN button MENU button SET button SETUP MENU SET MENU POWER CAMERA ALARM KEY LOCK PO CAMERA POSITION POSITION REMOTE CONTROL UNIT RM-P2580 AUTROEMOTFE-1 CONTRF-O2 L UNITF-3RM-P2580 F-1 F-3 LENS SPEED CLOSE IRIS OPEN FOCUS NEAR FAR CLOSEAF WIDE ZOOM TELE WIDE CAMERA/POSITION 123 CAMERA POSI- TION CAMERA/POSITION 456 OPTION OPTION 1 CAMER2A 789 CLEAR 0 /HOME ENTER AUTO PAN AUTO PATROL AUTO PAN AUTO PATROL /HOME PAN/TILT PAN/TILT control lever RM-P2580 Set when a bright light source is placed behind or in the direction of the subject making the point difficult to view on the screen. Make the setting after selecting the BLC item on the VIDEO ADJUST screen. MEMO BLC does not function while the digital zoom is in used. Fixed Light Metering Areas Light Light Light Light Light metering metering metering metering metering area area area area area OFF AREA 1 AREA 2 AREA 3 AREA 4 Ⅲ Set the BLC item to any of AREA 1 to AREA 4. When the SET button is pressed, the fixed light metering area is displayed on the monitor. Adjust so that the unwanted light source is outside the light metering area. Ⅲ To stop display of the light metering area: • Press the SET button when operating on the camera body. • Press the MENU button when using RMP2580. The VIDEO ADJUST screen returns. 32