JVC TK-C553U Instruction Manual - Page 19

Adjusting the Camera Angle

Page 19 highlights

Adjusting the Camera Angle Remove the dome cover. Rotate the dome cover counterclockwise and pull it off. Dome cover Ⅲ Horizontal rotation (adjustable range: 90°) 1. Loosen the horizontal LOCK screw. 2. Holding the both tilt lock screws, rotate horizontally. 3. Tighten the horizontal LOCK screw. Camera head MONITOR LOCK LEFT AWC INT OFF TERMINATION UP RIGHT SET NOT USED NOT USED L/L ON DOWN Horizontal LOCK screw Ⅲ Vertical rotation (adjustable range: 130°) 1. Loosen the tilt lock screws. 2. Holding the rotation levers, rotate vertically. 3. Tighten the tilt lock screws. Ⅲ Image inclination (adjustable range: 30°) Manipulate the rotation levers to adjust the inclination of the image. Rotation levers Ⅲ Adjusting the image size Adjust the size using the zoom ring. Zoom ring Focus ring Ⅲ Adjusting the focus Adjust using the focus ring. When required, the surveillance image should be adjusted, etc. This adjustment is performed using the setup screen. Tilt lock screws 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44

19
Adjusting the Camera Angle
Remove the dome cover.
Rotate the dome cover counterclockwise and
pull it off.
±
Horizontal rotation
(adjustable range: 90
°
)
1.
Loosen the horizontal LOCK screw.
2.
Holding the both tilt lock screws, rotate
horizontally.
3.
Tighten the horizontal LOCK screw.
±
Vertical rotation
(adjustable range: 130
°
)
1.
Loosen the tilt lock screws.
2.
Holding the rotation levers, rotate
vertically.
3.
Tighten the tilt lock screws.
±
Image inclination
(adjustable range: 30
°
)
Manipulate the rotation levers to adjust the
inclination of the image.
±
Adjusting the image size
Adjust the size using the zoom ring.
±
Adjusting the focus
Adjust using the focus ring.
When required, the surveillance image
should be adjusted, etc. This adjustment
is performed using the setup screen.
MONITOR
LOCK
LEFT
RIGHT
SET
UP
AWC
DOWN
NOT USED
NOT USED
L/L
ON
INT
OFF
TERMINATION
Horizontal LOCK
screw
Dome
cover
Camera head
Rotation levers
Tilt lock screws
Focus ring
Zoom ring