JVC TK-C553U Instruction Manual - Page 35
AWC One-push Auto White Balance Adjustment
View all JVC TK-C553U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
AWC (One-push Auto White Balance) Adjustment MONITOR LOCK LEFT AWC INT OFF TERMINATION UP RIGHT SET NOT USED NOT USED L/L ON DOWN LEFT button UP(AWC) button AWC RIGHT DOWN - - V I DEO AD J UST - - I R I S LEVEL CO L OU R L E V E L ENHANCE L EVE L AGC MOD E SUPER AGC BLC . . AVERAGE : PEAK WH I T E B A L A NC E END NORMA L NORMA L NORMA L 20dB OF F OF F 8:2 AWC VIDEO ADJUST screen AWC OPERAT I ON During AAWWCCoperation AWC OK Indication when operation is completed normally. AWC NG : OB J EC T Indication in case of abnormality Using a simple operation, the AWC function allows the white balance to be fixed as the one valid at a given point. Used for observation when the color temperature changes frequently. 1. The following two methods are available for activating the AWS function. 1 Press the UP (AWC) button on the camera body for about 1 second while the normal screen (no setup menu shown) is displayed. or 2 Set the WHITE BALANCE item on the VIDEO ADJUST screen to AWC and press the SET button. (Possible both on the camera body and the RM-P2580). 2. When the AWC function is activated, "AWC OPERATION" is displayed at the bottom of the monitor screen. 3. The result of the AWC operation is displayed on the monitor screen for approximately 5 seconds. Then the screen displayed before the AWC function was activated returns. (Normal screen or VIDEO ADJUST screen) Operation result indication AWC OK AWC NG : OBJECT AWC ERROR : HIGH LIGHT AWC ERROR: LOW LIGHT : Completed normally : The color temperature is outside the tracking range : Excessive brightness : Insufficient brightness Blinks MEMO: The AWC function invoked by the UP (AWC) button on the camera body starts up regardless of the setting of the WHITE BALANCE item on the VIDEO ADJUST screen. 35