JVC TK-C553U Instruction Manual - Page 41

AUTO PATROL Setting HOME POSITION 1 POSITION 2 POSITION 5 POSITION 3 POSITION 4 AUTO PATROL (Factory setting) S - - FUNCT I ON- - POS I T I ON TEX T POS . T E X T LOC . AUTO PA TROL . . A U T O P A N MOD E ALM . TEXT S I ZE END ED I T . . UP - L PAN DOUB L E FUNCTION screen MENU button SET button (RM-P2580) SETUP MENU SET POWER ALARM KEY LOCK CAMERA POSITION REMOTE CONTROL UNIT RM-P2580 AUTO F-1 F-2 F-3 LENS SPEED CLOSE IRIS OPEN FOCUS NEAR AF FAR WIDE ZOOM TELE CAMERA/POSITION 123 CAMERA POSITION 456 OPTION OPTION 1 2 789 CLEAR 0 /HOME ENTER AUTO PAN AUTO PATROL PAN/TILT POSITION button PAN/TILT control lever AUTO PATROL button The AUTO PATROL function allows you to specify multiple positions (up to 6 positions) that the camera will move to in the specified order and observe for the specified interval. The order of movement and observation interval for the AUTO PATROL operation can only be set by transmitting commands from the RM-P2580, etc. 1. Align the cursor (>) with the AUTO PATROL item on the FUNCTION screen. Then press the SET button. • The AUTO PATROL setting screen appears on the monitor. The PATROL1 to 6 items indicate the AUTO PATROL operation order. PATROL1: Specifies the first position number and the observation interval for AUTO PATROL. PATROL6: Specifies the last position number and the observation interval for AUTO PATROL. 2. Press the PAN/TILT control lever up (6) or down (7) to align the cursor (>) with the PATROL No. item to be set. ... 41