Jenn-Air JGRP436HL Owners Manual - Page 15

USING YOUR OVEN OVEN CONTROL KNOBS To Use: 1. Select desired function on the Mode Knob. 2. Select desired temperature on the Temperature Knob. 3. To turn off the unit, the temperature knob needs to be turned to OFF. Knob Combinations The following tables show valid and invalid knob combinations for the temperature and mode knobs. MODE KNOB Bake Convect Bake Convect Roast Convect Pastry Convect Poultry (18" cavity only) Broil/Convect Broil (30" & 36" cavity only) Self Clean Wi-Fi PROOF KEEP WARM Valid Invalid Invalid Invalid Invalid Valid Invalid Invalid Invalid Invalid TEMP RANGE 107-260oC (225500oF) Valid Valid Valid Valid Valid TEMPERATURE KNOB BROIL LOW BROIL HIGH SLOW BAKE L 93oC (200oF) Invalid Invalid Invalid Invalid N/A Invalid Invalid Invalid Invalid N/A Valid Valid Valid Valid Valid Invalid Invalid Invalid Valid Valid N/A Invalid Invalid Invalid Invalid Invalid Invalid Invalid Invalid Invalid Invalid Invalid Invalid SLOW BAKE H 135oC (275oF) Valid Valid Valid Valid Valid CLEAN Wi-Fi Invalid Invalid Invalid Invalid Invalid Invalid Invalid Invalid N/A Invalid Invalid Invalid Invalid Valid Invalid Invalid Valid NOTE: When the unit is on, mode can be changed between Bake, Convect Bake, Convect Roast, Convect Pastry, Convect Poultry (left cavity only), and Broil (right cavity only). Press the Start button to confirm mode change. INDICATOR LIGHTS The indicator lights illuminate and blink to show the status of the unit. BEHAVIOR Light Pulsing/Blinking Mode and Temperature Knob Indicator - Slow Blink START Button - Invalid Selection (Quick Blink) DESCRIPTION/EXAMPLES EXAMPLES Light pulsing is used on the Mode Knob, Temperature Knob, and Start button as a way to prompt for action. When an action is prompted to be completed, the associated indicator light feature will blink. Examples: Occurrence: Prompt for action, press the START button Result: Start button indicator light quickly blinks Occurrence: 100ºF (38ºC) decrease in temperature required or oven too hot for Proof Result: Knob indicator lights will slowly blink until the oven is at the correct proof temperature There are two types of pulsing: 1. Start Button Quick Blink: prompting for action. 2. Mode/Temperature Knob White slow blink: preheating Amber slow blink: unit is above target temperature. When a cycle requiring preheat starts, slow blink will begin. When preheat temperature has been reached, the blinking will stop and the mode/temp indicator lights will be solid. The Mode and Temperature knob indicators will slowly blink to indicate that the feature is in use. A slow blink indicates that a feature is being used and no further action is required i.e. unit is preheating. If an invalid knob combination has been chosen and the Start Button is pressed, the Start Button Indicator Light will quickly blink and a tone will sound to indicate that the chosen selection is invalid. Bake on the Mode Knob and Wi-Fi on the Temperature Knob. See "Knob Combinations" table for examples. 15