Jenn-Air JGRP436HL Owners Manual - Page 16

USING YOUR OVEN BEHAVIOR Temperature/Mode Knob Invalid Selection (Quick Blink) Prompt for Action Inactivity (Quick Blink) Validity Check Delay Invalid Temperature Selection Made During A Cycle Changing Mode Selections During A Cycle DESCRIPTION/EXAMPLES EXAMPLES If an invalid knob combination has been chosen, the Mode Knob Indicator Light and Temperature Knob Indicator Light will quickly blink white. The indicator light will continue to quickly blink and a tone will sound every 30 seconds until the error is fixed or timeout after 2 minutes of inactivity. Bake on the Mode Knob and Wi-Fi on the Temperature Knob. See "Knob Combinations" table for examples. When a valid knob combination has been made, the Start button indicator light will quickly blink to prompt for the Start button to be pressed. If no action is taken after 2 minutes, a tone will sound and the unit will timeout and return to idle mode. To exit the unit from idle mode, reselect a Mode and Temperature Knob selection before pressing the Start button. A quick blink indicates that a valid combination has been selected and is prompting for an action to be taken i.e. Mode is in Bake and temperature is at 350oF (177oC), but the Start button has not been pressed yet. The unit goes through a validity check to verify that the selected Mode and Temperature combination is valid. If a valid combination has been selected, the Mode/Temperature Knob indicator lights will show white and the Start button will begin to blink prompting for action. Refer to "Knob Combinations" section for more information. If Start Button is pressed too quickly in the validity check, the Start Button indicator light will display an invalid quick blink. If an invalid combination has been selected, the knob indicator lights will blink to show that the selected Mode and Temperature combination is invalid. If the Temperature Knob is changed during a cycle to a selection that is invalid and the unit was in a previous cycle, the unit will remain in the previous cycle until corrected. Mode is in bake, temp is at 350oF (177oC), Start button is pressed and cycle is running. Then temp is moved to clean. Unit will continue to bake at 350oF (177oC). The knob indicator lights will blink to show an invalid selection has been made and will continue to light until corrected. If the Mode or Temperature Knob is changed during a cycle to a selection that is valid, the Start button will blink to indicate prompt for action. Press the Start Button to begin new setting selection. If the Mode Knob is moved from Bake to Convect Bake, the Start button will blink as a prompt for action. A tone will sound when: ■ The unit is powered on ■ The unit switches to Off mode ■ A valid Mode and Temperature selection has been made and the Start button is pressed to begin a cycle ■ An invalid Start button selection is made ■ There is an error with the unit ■ Preheating has been completed ■ The timer from the app has ended (the tone will sound every five minutes until the timer is stopped) ■ A Wi-Fi event is occurring ■ The Meat probe connects/disconnects. 16