Jenn-Air JGS8850CDS Installation Instruction - Page 14

5. Lift up and remove oven bake burner cover. 6. Remove the 2 oven bake burner screws and set aside. 7. Swing the oven bake burner to the side and lift it off the oven orifice and set aside. A 10. Unscrew the regulator cap and remove the plastic cover. A B B A A. Oven bake burner screws B. Oven orifice 8. Locate the access panel at the rear of the storage drawer compartment. Using a ¼" (6 mm) nut driver, unscrew the 2 access panel screws. Remove access panel and set aside along with the 2 screws. A A. Access panel screws 9. Locate gas pressure regulator at the rear of the storage drawer compartment. A. Plastic cover B. Regulator cap 11. Flip the regulator cap over and replace the plastic cover. B A C A. Natural gas position B. LP gas position C. Plastic cover 12. Screw the regulator cap securely back into place. Do not overtighten. To Convert Oven Bake Burner 1. Locate the oven orifice hood from the front of the range. 2 2 IMPORTANT: Do not remove the gas pressure regulator. 2. Using an adjustable wrench, turn the Number 49 Natural gas oven bake burner orifice hood counterclockwise to remove. 49 A A. Number 49 Natural gas oven bake burner orifice hood 14