Jensen MCD9424RC Operation Manual - Page 11

® MCD 9424JA Installation Before You Begin Installation Before you begin, you will need tools, supplies and adapters. It is best to make sure you have everything you need before you take your dashboard apart. Tools and Supplies Needed Professional Tip Basic Installation: • Flat and Phillips screwdrivers • Wire cutters • Wire strippers • Tools to remove existing radio (screwdriver, socket wrench set or other tools) • Electrical tape Speaker Requirements Only connect the MCD 9424JA to speakers rated in the load impedance range of 4 to 8 ohms. Speakers with a load impedance less than 4 ohms could damage the MCD 9424JA. Important Installation Note Upgrading Your System International Jensen makes a wide range of marine stereo products that will make your stereo system sound better, great or INCREDIBLE! Better Sound Install a Jensen tape deck or CD player like you're doing now. High power units can make your existing speakers sound better and play louder. Great Sound Replace your existing speakers with Jensen Marine speakers. INCREDIBLE Sound Jensen offers a full line of amplifiers, highpower speakers and subwoofers that can turn your boat into audio dynamite. You can go loud, louder and loudest by selecting Jensen components from your retailer. Install the MCD 9424JA in a well ventilated location. Do not install the unit in a closed box. If the unit is installed without adequate ventilation, damage could occur due to overheating. OPEN VOL AS/PS VOL WB BAND SEL/ ® ST SHUFFLE 8 X OVERSAMPLING • 4 X 25WATTS CH COMPACT DIGITAL AUDIO MCD-9424JA W1 1 W2 2 W3 3 RPT 4 SHF 5 SCN 6 LOUD DISP PWR 2