Jensen NVX200 User Manual - Page 63

5.4 Route parameter settings This is a very important page. Settings here determine how routes will be calculated. This screen is directly accessible from the Route Information screen (4.6). 5.4.1 Method Use the handle to set the speed of the route calculation. In the leftmost position the route may not be optimal but the calculation will be very fast. Sliding it to the right will result in more accurate routing in an increased amount of time. Note: Since The NVX200 Navigator calculates routes very quickly; the position of this slide is only used for long routes. Short routes are always calculated to give you the optimal result independent of the slider. 5.4.2 Route Here you can choose from three different route types. 5.4.2.1 Shortest Choosing Shortest will result in a route that has the smallest total distance of all possible routes between the given points. Pedestrians, cyclists or slow vehicles usually prefer this. 5.4.2.2 Fastest Choosing Fastest will result in the quickest possible route, given that you can travel at or near the speed limits on all included roads. This is usually preferred for fast and normal cars. 5.4.2.3 Economical This setting is a wise combination of the previous two. Although basically going for the fastest solution, if there is another route taking a bit more time but a lot less distance compared to the fastest one, The NVX200 Navigator will choose this one instead to save fuel. 63