Kenmore 2029915 Use and Care Manual - Page 15

DIRT SENSOR The DIRT SENSOR light system is mounted on the PowerMate DIRT SENsoR...._. nozzle near the reset button. It consists of a series of two red lights and two green lights.. The lights give you an indicationof the amount of dirt particles that are passing through the sensor on its way to the dust bag.. INITIAL START UP When the PowerMate is first started, the following light sequence occurs in a two-second time frame: IoTwo reds come on. 2. Two greens are on and wi]l remain on until the PowerMate nozzle is placed in use_ NOTE: if the nozzle is on a surface that has dirt on it, dirt will be picked up by the vacuum cleaner and the red lights might slay on IN OPERATION When the PowerMate is being moved back and forth on the floor, the lightswill change from one configuration to another as dirt is being vacuumed..As long as the red lights are on, dirt is passing through the wand to indicate that the surface still needs cleaning. When the green lights stay on as the PowerMate is moved back and forth over an area, the sensor is not seeing enough dirt to warrant further cleaning of that area. NOTE: Dirt sensor lights DO NOT function in the FLOOR setting REMOVING CLOGS The vacuum cleaner creates suction that picks up dirt.. Rapidly moving air carries the ,i'f/_._.'_._ dirt to the dust bag through the airflow passages. The dust bag lets the air pass through, while it traps the dirt_ //// For best cleaning results, keep the airflow ,,,_>_y t passage openr Check the starred areas ..,_'._" [, occasiofo.FacllolgyTsu,ronffand #/ li unplug vacuum cleaner from outlet ..___/ before checking __// I Motor 15