Kenmore 2029915 Use and Care Manual - Page 17

i CLEANING EXTERIOR AND ATTACHMENTS 1. Turn off and unplug vacuum cleaner. DO NOT drip water on vacuum cleaner. 2. To clean exterior, or to reduce static electricity and dust build-up, wipe outer surface of vacuum cleaner and attachments. Use a dean, soft cloth that has been dipped in a solution of mild {iquiddetergent and water, then wrung dry. Wipe dry after cteaning CAUTION Do not use attachments if they are wet° Attachments used in dirty areas, such as under a refrigerator, should not be used on other surfaces until they are washed. They could leave marks. / = nlllm uuluull,lll.ul= MOTOR SAFETY FILTER CHANGING iL, ,WARNING Electrical Shock Hazard Turn off and unplug vacuum cleaner From electrical outlet. Do not operate the vacuum cleaner without the motor safety filter. Be sure the filter is dry and properly installed to prevent motor failure andlor electrical shock. ii MOTOR SAFETY FILTER ELECTROSTATIC This filter must be replaced when dirty It should be replaced regularly depending on use conditions° The filter CANNOT be washed as it will lose its dust trapping ability. NOTE: See PARTS AND FEATURES for Motor Safety Filter number 1oRemove the bag as outlined in the BAG CHANGING section. 2° Lift the rubber retainer and pull out motor safety filter as shown ..4L_,j_'_/_----_ Retainer S ,._ _ _ _iRubber _Retainer_ 3oReplace the fitter, toward dust bag, by sliding it back into wpthlhaeictebeaugsnidcdeaevriftaytchienTgruibcsk in _" J filter in so that it fits completely under the rubber retainer. 4. Replace the bag as outlined in the BAG CHANGING section. I7