Kenmore 2029915 Use and Care Manual - Page 25
Constant
![]() |
View all Kenmore 2029915 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Constant green Eight on 1. Dirt passage is dogged in dirt sensor, 2. Lenses ere dirty No green or red dirt sensor lights, 1o Switch not in CARPET position,, 2, No power to sensor board. CHECK BAG Indicator activates, 1,, Full or clogged dust bag 2,, Didy filters 3,, Blocked airflow passage 4_ Certain attachmenI tools Vacuum cleaner picks up moveable rugs -orPowerMate pushes too hard. I, Wrong pile height setting 2, Suction too strong Red light for BELT RESET (overload protector) is lit on the PowerMate, !, Tripped overload protector in PowerMate. Cord won't rewind° Io Dirty power cord 2., Cord jammed Vacuum cleaner leaves 1., Wrong vacuuming pattern marks on carpet, t Check for clogs in air passages. 2, Clean lenses,, 1, Move swilch to CARPET position 2. Take to your nearest Sears Service Cen_er, 1, Change bag 2, Change filters 3, Clear blockage from airflow passage 4, This is normal Light should go off when tool is removed 1, Adjust setting. 2 Select lower Power Level 1. Remove any items that may be caught or jammed, then reset. If vacuum cleaner starts and stops again, clean agitator and end caps. then reset 1. Clean the power cord 2. Pull out cord and rewind 1, See VACUUMING TIPS 25
![](/manual_guide/products/kenmore-2029914-use-care-manual-74b1dbd/25.png)