Kenmore 2029915 Use and Care Manual - Page 16
Bag Changing
![]() |
View all Kenmore 2029915 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
BAG CHANGING j For best cleaning results, the dust bag should be changed often.. The CHECK BAG indicator will come on when the bag needs to be changed or the airflow is blocked.. NOTE: See PARTS AND FEATURES for Bag Number t. Turn off and unplug vacuum cleaner. Hood Release. 2. Remove hose from canister, 3, Pull hood release out and up, then lift canister hood. Note: DO NOT bend or crease the middle of the cardboard when installing the bag into the bag mount slots. 8. Rotate red bag mount down and install bag into slots per illustration, pushing down until the cardboard tab locks into position and the holes align. 9, Tuck the bag securely into the bag cavity so that none of the bag is able to be pinched by the hood. 10, Close and latch canister hood 4. Disengage cardboard tab from red bag mount by pulling away and lifting up.. 5. Pull bag out of the red bag mount. 6oCheck the motor safety filter and replace, if necessar!.. 11. Insert hose into canister until it snaps in place t2,. Plug cord into wall outlet. , CAUTION NEVER REUSE A DUST BAG. Very fine materials, such as carpet freshener, face powder, fine dust, plaster, soot, new carpet lint, etc. can clog the bag and cause it to burst before it is full and may cause damage to vacuum cleaner motor° Change bag more often when vacuuming these materials. 7. The red bag mount will flip forward after removing bag. This will prevent the hood from closing until a new bag is installed. t6
![](/manual_guide/products/kenmore-2029914-use-care-manual-74b1dbd/16.png)