Kenmore 7540 Use and Care Guide - Page 13

Control Pad Features READ THE iNSTRUCTiONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become familiar with the various features and functions of the oven as described below. Detailed instructions for each feature and function follow later in this Use & Care Guide. I Note: The oven function will not work if the time of day clock is not set. I Oven Interior Light Pad- Cook Time Pad- Used Used to turn oven interior to enter the length of light ON and OFF. the baking time. Feature indicator lights- These light show which feature is Clock PadUsed to set the time of day. Up and Down arrow pads- Used Add 1 Minute Pad- Used to add 1 along with the function pads to minute to the Timer Countdown=This select oven temperature, cooking feature works with the Kitchen Timer time, start time (when programming only and does not affect any cook time an automatic start time), time of day, or start time functions= clean time and minute timer. J Bake Pad- Used to .... \ _ enter the normal baking in use. X Select Clean PadUsed to select the self-cleaning cycle. /\ _ '" _ mode temperature. /\. _ ,,,_-,,,,_j_ Broil Pad- Used to _(: _#UT1E(B) AKE) (BRoiL_-seleet the variable broil _\ _ _ _ function. Kitchen Timer Pad- Used to set or cancel the minute timer. The minute timer not start or stop cooking. Delay Start Pad- Used to set the desired start time for baking. Can be used with OVEN COOK TiME to program a delayed bake cycle. _\_ O OVEN o PREHEAT DOOR LOCKED __ __Warm&HoldPad- _} _,_b-oK) _,,_L_) Used to set the Keep / __ _ _ Warm feature. j '-._' _ _ LOgrE_K_o__ Used to set the Slow Cook feature. Oven, Preheat, Door Locked & Cooktop Locked lights- The "oven" light indicates that the oven is functioning. The "Preheat" light will glow when the oven is first set to operate, or if the desired temperature is reset higher than the actual oven temperature. The "Door Locked" light will flash until the door locks when the self-clean cycle is in use. It glows constantly after the door locks. ......... Stop Pad- Used to clear any function previously entered except the time of day and minute timer. Push Clear pad to stop cooking. Also used to activate the Oven Lock feature. RecipReeca.-!-::i,i Used to set the fReeactuipree. Recall For a silent control panel When choosing a function, a beep will be heard each time a pad is pushed. If desired, the controls can be programmed for silent operation. To tell if your oven is set for normal or silent operation push and hold for 7 seconds. "- -" or "SP" (speaker) appears in the display. Within 5 seconds, press ,,% or v to switch between normal sound operation and silent operation mode. The display will show either "--" or"SP". Wait 5 seconds to return to normal operating mode. Note: If "SP" appears, the control will operate with normal sounds and beeps. If "- -" appears, the control is in the silent operation mode. Temperature Conversion (Fahrenheit / Celsius) The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be programmed for any temperature from 170°F to 550°F (77°C to 288°C). To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode): 1. Press and hold _ for 7 seconds until °F or °C appears in the display. 2. Press A or V to change °F to °C or °C to °F. 3. Wait 5 seconds or press _ to accept the changes. To Operate the Oven Light The interior oven light will automatically turn ON when the oven door is opened. Press _ to turn the interior light ON and OFF whenever the door is closed. The interior oven light is located at the upper left rear wall of the oven interior and is covered with a glass shield held by a wire holder. The glass shield must be in place whenever the oven is in use. To change the interior oven light, see changing the Oven Light in the General Care & Cleaning section in this Use and Care Guide. 13