Kenmore 9742 Use and Care Guide - Page 33

Self- Cleaning • Setting Flex Clean • Setting Delay Flex Clean INSTRUCTIONS When the Self=Clean cycle is done: 1. The time of day,"Hot, DOOR LOCKED" and "CLEAN" icon will remain in the display (See Fig. 7). 2. Once the oven has cooled down for approximately 1 HOUR, and the "DOOR LOCKED" icon is no longer displayed, the oven door can then be opened. PRESS DISPLAY Fig.7 Stopping or Interrupting a Self=Cleaning cycle: If it becomes necessary to stop or interrupt a Self=Cleaning cycle due to excessive smoke or fire in the oven 1. Press_. 2. Once the oven has cooled down for approximately 1 HOUR and the "DOOR LOCKED" icon is no longer displayed,the oven Fig.8 door can then be opened (Fig. 8). IMPORTANT NOTES when using the Self-Clean feature: 1. The Self-Clean feature will not operate whenever a radiant surface remains ON. 2. A Self-Clean cycle may be started if the appliance has the Cooktop Lockout active. A Self-Clean cycle cannot be started if Oven Lockout feature is active. ...i.i..i 3. If a Self-Cleaning-Cycle has started but not finished and a power failure occurs, the appliance may not have thoroughly cleaned. Once power is restored, set for another Self-Clean cycle to finish. 4. If your clock is set for normal 12 hour display mode the Delay Self-Clean cycle can never be set to start more than 12 hours in advance. To set for Delay Flex-Clean 12-24 hours in advance see page 13 for instructions to set the control for the 24 hour time of day display mode. 33