Kenmore 9746 Use and Care Guide - Page 19
Setting, Oven Features
View all Kenmore 9746 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Setting Oven Features Setting the clock When the range is first powered up. the time of day starting with "12:00" will flash in the display (Fig. 1). To set the clock for 1:30: Step Press 1. Press Clock to set. © 2. Enter1:30. ®@@ 3. Press Start. It is recommended to always set the clock for the correct time of day before using the appliance. The clock cannot be changed whenever Cook time or Delay Cook feature is active. If there has been a power interuption the display will flash the time of day beginning with "12:00" indicating the time of day needs to be reset. Fig. 1 Changing between 12=Hour Energy Saving feature or continuous bake setting The oven control has a factory preset built-in 12 Hour Energy Saving feature that will turn off the oven if the oven is left on for more than 12 hours. The control can be programmed to override this feature to continuously bake. To turn off 12=Hour Energy saving feature: Step Press 1. Press and hold the Timer Set/Off keypad for 6 seconds. 2. Press Flex Clean to toggle between 12Hr Off (12 hour) (Fig. 2) or "StAy On (24 hour) (Fig. 3). Select 24 hour to turn off 12-Hour Energy Saving mode. 3. Press Start to accept. @ c_o_, v Setting 12 or 24 hour display modes The clock display mode allows you to choose between 12 or 24 hr mode. The factory pre-set clock display mode is 12 hr. See the example below to change the default mode to 24 hr display. To set 12 or 24 hour mode: Step Press 1. Press and hold the Clock keypad for 6 seconds. 2. Press Flex Clean to toggle between "12 Hr dAY" or "24 Hr dAY" display modes (See Figs. 4 & 5). 3. Press Start to accept. @ c,oo. V Fig. 4 Fig. 5 ',:i Changing oven temperature display (°F or °C) The oven control is preset to display °F (Fahrenheit) when shipped from the factory. To change the temperature to display °C (Celsius) (oven should not have Bake or Flex Clean active when setting this feature): Step . Press and hold Broil for 6 seconds. 2. Press Flex Clean to toggle between "FAhr nht" or "CELSIUS" temperature display modes (Figs. 6 & 7). If Celsius display is needed, select "CELSIUS". Press B,o, c_o,, 3. Press Start to accept. Fig. 6 Fig. 7 Fig. 2 Fig. 3 19