Kenmore MS-1242KLSY Use and Care Guide - Page 20
Temperature, Multi-power
View all Kenmore MS-1242KLSY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
TEMPERATURE COOKING CONTROLLED "MULTI-POWER" The "'Temperature Controlled Meat Cooking Guide" and "Reheating Guide" on Pages 17 and ]S will show you which multi-power setting and temperature setting are re_:ommended for the food you are cooking. I. Place the temperature probe into the food with the first inch of the sensor in the center of the food. See step 1 on page 19. 2. Plug the temperature probe into the socket on the side of the oven. See step 2 on page 19. CAUTION: Do not plug the pointed end of the ternperature probe into the socket. 3. Touch CLEAR. 4. Touch TEMP CONTROL. The lights above TEMP and below COOK I will go on, and "F" will show in the display window. --Kenmore -- L AUlO Re¢il_e 3_ 5. Choose the food temperature and touch the corres- ponding example, numbers. For if the recipe calls for doneness at 155°F. you would touch numbers "I" "5" and "5", When you touch "155", the display window will show "'155F", If the temperature probe is not plugged into the socket, the probe light will flash and the oven will not work. 6. Touch POWER CONTROL. The light above POWER will go on. Also, the word "HI" will show in the display window until you enter a lower power setting. This is to remind you that the oven will always operate at full power unless you set a lower power. _ CK317_'-; -- l._enmor,_ -- 7. Choose the power control setting you desire and touch the corresponding numbers. For example, if the recipe should call for cooking at the "70 (ROAST)" setting, you would touch numbers "7" and "0". When you touch "7" and "0", the display window will show "70". This means that in the "70 (ROAST)" _etting the oven is at power zvel 70. 8. Touch START. The oven will begin to cook and you will be able to see the temperature of the food rising in the display KenmorQ window. ( Auto R_ipt 300 1 9. A tone _ll sound and the word "End" will show in the Display Window for 2 seconds when the desired temperature is reached. ( Au=o R_i_ 300 ) NOTE: If you want to keep the food warm after finishing the cooking cycle, you can use "Hold Warm" feature. For detailed instructions on using "Hold Warm" feature, See page 12. The highest temperature that can be set is 200°F. The temperature is displayed in I°F increment. 2O