Kenwood DDX419BT Instruction Manual - Page 41

Bluetooth® Settings • ON (Initial): Automatically establishes a connection with the last connected Bluetooth device when the unit is turned on. • OFF: Cancels. Select the speakers used for Bluetooth mobile phones and Bluetooth audio players. • Front Only: Front speakers only. • All (Initial): All speakers. • ON: The unit answers the incoming calls automatically in 5 seconds. • OFF (Initial): The unit does not answer the calls automatically. Answer the calls manually. • ON (Initial): Establishes pairing automatically with an iOS device (such as iPhone) connected via USB. (Auto pairing may not work for some devices depending on the iOS version.) • OFF: Cancels. Touch and hold [Enter] to reset all settings you have made for using Bluetooth mobile phones and Bluetooth audio players. Audio settings Display the screen. On the Home screen, touch as follows: Then, on the screen, touch [Audio]. Setup Audio Equalizer Display Sound Effect Input Fader / Balance System Speaker / X'over Time Alignment Enter Enter Enter Enter Enter E.g. Audio settings screen for DDX396 You cannot change the screen in the following situations: • When the AV source is turned off. • When the Bluetooth phone is used (making or receiving a call, during a call, or while voice dialling). The following adjustments are memorized for each source until you adjust the sound again. If the source is a disc, the adjustments are stored for each of the following categories. • DVD/VCD • CD • DivX*1/MPEG1/MPEG2/MP3/WMA/WAV/AAC/FLAC You cannot adjust the sound when the unit is in standby. Selecting a preset sound mode Select a preset sound mode on the screen. • Natural (Initial)/Rock/Pops/Easy/Top40/Jazz/ Powerful/User Equalizer SRC Name Preset Natural Q factor 1.5 [dB] +9 +7 +5 +3 0 -3 -5 -7 -9 62.5 100 160 250 400 630 1k 1.6k 2.5k 4k 6.3k 10k 16k [Hz] Bass EXT ON OFF SW LEVEL 0 EQ INIT ALL SRC • To apply the adjusted equalizer to all playback sources, touch [ALL SRC], then touch [OK] to confirm. ENGLISH 39