Kenwood DDX419BT Instruction Manual - Page 58

Installation and Connection Wiring connection *1 *2 ¥ *3 Purple with white stripe Light green White ] / White with black stripe [ Gray ] / Gray with black stripe [ Green ] / Green with black stripe [ Purple ] / Purple with black stripe [ Brown Orange with white stripe Light blue with yellow stripe Blue with white stripe (12 V 350 mA) Red (Ignition wire) Yellow (Battery wire) Black (Ground wire) 56 ENGLISH 10 A fuse " *1 Only for DDX396/DDX376BT/DDX276BT/ DDX26BT. *2 Only for DDX396/DDX376BT/DDX276BT. *3 Only for DDX419BT. *4 Only for DDX396/DDX419BT: For 3-way speaker system connection, see also page 57. Connect the antenna cord to the antenna terminal USB input terminal (1 m) REVERSE To the car's reverse lamp harness when using the optional rear view camera To the car's parking brake detection switch harness PRK SW Extension wire ( ø ) (For best safety, be sure to connect the parking sensor.) To front speakers/mid range speakers*4 (left) To front speakers/mid range speakers*4 (right) To rear speakers/tweeter speakers*4 (left) To rear speakers/tweeter speakers*4 (right) MUTE Not used. ILLUMI STEERING WHEEL REMOTE INPUT REMOTE CONT ANT.CONT P.CONT To the car light control switch To the OE remote adapter (not supplied) which is compatible with your car To the power control terminal when using the optional power amplifier (Or) To the control terminal of the motor antenna or to the power terminal for the booster amplifier of film-type antenna Ignition key switch Car fuse To the car chassis Car battery