Kenwood DDX419BT Instruction Manual - Page 55
Installation and Connection
View all Kenwood DDX419BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Remote Controller Installation and Connection KENWOOD Remote APP KENWOOD Remote is an application that connects and controls compatible KENWOOD car receivers via Bluetooth® like a wireless remote control. You can also operate this unit from a Smartphone using KENWOOD Remote APP. This application can display the source information of this unit on the smartphone's screen, and enables the user to make an audio setting using the graphic user interface of this application. This application also works as a free standalone music player application, when your Smartphone is not connected to this unit. • For details, visit . WARNINGS • DO NOT connect the ignition wire (red) and the battery wire (yellow) to the car chassis (ground), you may cause a short circuit, that in turn may start a fire. • DO NOT cut out the fuse from the ignition wire (red) and the battery wire (yellow). The power supply must be connected to the wires via the fuse. • Always connect the ignition wire (red) and the battery wire (yellow) to the power source running through the fuse box. CAUTIONS • Install this unit in the console of your car. • Do not touch the metal parts of this unit during and shortly after the use of the unit. Metal parts such as the heat sink and enclosure become hot. • When parking at a low ceiling area, turn off the unit to store the antenna. As when the unit is installed in the car with the function of auto antenna; the radio antenna extends automatically when you turn on the unit with the antenna control wire (ANT. CONT) connected. (Page 56) Before installation Precautions on installation and connection • Mounting and wiring this product requires skills and experience. For best safety, leave the mounting and wiring work to professionals. • Mount the unit so that the mounting angle is 30° or less. • Make sure to ground the unit to a negative 12 V DC power supply. • Do not install the unit in a location exposed to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing. • Do not use your own screws. Use only the screws provided. If you use the wrong screws, you could damage the unit. • After the unit is installed, check whether the brake lamps, blinkers, wipers, etc. on the car are working properly. • Do not press hard on the panel surface when installing the unit to the car. Otherwise scratches, damage, or failure may result. • If the power is not turned on ("Miswiring DC Offset Error", "Warning DC Offset Error" is displayed), the speaker wire may have a short circuit or have touched the chassis of the car and the protection function may have been activated. In this case, the speaker wire should be checked. • Keep all cables away from heat dissipating metal parts. ENGLISH 53