Kenwood DDX419BT Instruction Manual - Page 42
<Sound Effect>, <Fader/Balance>, Store your own sound adjustments
View all Kenwood DDX419BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Settings Store your own sound adjustments 1 Select a preset sound mode. 2 Select a band (1) and adjust the level (2), then adjust the sound (3). Equalizer SRC Name Preset Natural Q factor 1.5 [dB] +9 +7 +5 +3 0 -3 -5 -7 -9 62.5 100 160 250 400 630 1k 1.6k 2.5k 4k 6.3k 10k 16k [Hz] Bass EXT ON OFF SW LEVEL 0 EQ INIT ALL SRC Adjust the sound as follows: Adjusts the width of the frequency. • 1.35/1.5 (Initial)/2.0 Activates/deactivates bass. • ON/OFF (Initial) Adjusts the subwoofer level.*2 • -50 to +10 (Initial: 0) • To clear the adjustment, touch [EQ INIT]. 3 Repeat step 2 to adjust the level of other bands. *1 Only for DDX419BT. *2 Not adjustable when is selected for subwoofer on the screen. (Page 41) Adjust the sound effect. Adjusts loudness. • OFF (Initial)/Low/High Selects the bass boost level. • OFF (Initial)/Level 1/Level 2/Level 3/Level 4/ Level 5 Reduces the driving noise by raising the bandwidth. • OFF (Initial)/ON *1 Virtually enhances the sound space using the Digital Signal Processor (DSP) system. Select the enhance level. • OFF (Initial)/Small/Medium/Large *2 Restores the sound lost due to audio compression to a realistic sound. • OFF/ON (Initial) Virtually makes the sound more realistic using the Digital Signal Processor (DSP) system. Select the sound level. • OFF (Initial)/Level 1/Level 2/Level 3 Moves the center of the sound to the lower or higher point. Select the height. • OFF (Initial)/Low/Middle/High *1 You cannot change the setting when "Radio" is selected as the source. *2 This function works only when "DISC"/ "USB"/ "iPod"/ "Android™" is selected as the source. Touch [J]/[K]/[H]/[I] or drag the mark to adjust. Adjusts the front and rear speaker output balance. When using a two-speaker system, set the fader to the center (0). • F15 to R15 (Initial: 0) Adjusts the left and right speaker output balance. • L15 to R15 (Initial: 0) To clear the adjustment: Touch [Center]. 40 ENGLISH