Kenwood DDX419BT Instruction Manual - Page 50
Remote Controller
View all Kenwood DDX419BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Settings Remote Controller Update the system by connecting a USB device containing an update file. • To obtain the update file, visit . Connect a USB device with the update file to the unit. Updates the system application. Updates the system. • If you turned the power off then on or turn the ignition switch off then on after selecting , the unit will reset. Updates the DVD system application. The system update starts. It may take a while. If the update has been completed successfully, "Update Completed" appears, then reset the unit. • Do not disconnect the USB device while updating. • If the update has failed, turn the power off and then on, and retry the update. • For DDX419BT: This unit can be operated using the remote controller (RC-DV340) supplied with this unit. • For DDX396/DDX376BT/DDX276BT/DDX26BT: Optional remote controller KNA-RCDV331 is designed for controlling this unit. Refer to the instruction manual that comes with the remote controller. Remote sensor* * DO NOT expose the remote sensor to bright light (direct sunlight or artificial lighting). RC-DV340 CAUTION • Put the Remote Controller in a place where it will not move during braking or other operations. A dangerous situation could result if the Remote Controller falls down and gets wedged under the pedals while driving. • Do not leave the battery near fire or under direct sunlight. A fire, explosion or excessive heat generation may result. • Do not recharge, short, break up or heat the battery, or place it in an open fire. Such actions may cause the battery to leak fluid. If spilled fluid comes in contact with your eyes or clothing, immediately rinse with water and consult a physician. • Place the battery out of reach of children. In the unlikely event that a child swallows the battery, immediately consult a physician. Shows the Open Source Licenses. 48 ENGLISH