Kenwood DDX573BH North America - Page 5
Clock settings
View all Kenwood DDX573BH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
INITIAL SETTINGS 5 Repeat step 4 to confirm your security code. Now, your security code is registered. • When the unit has been reset or disconnected from the battery, you are required to enter the security code. Enter the correct security code, then press [Enter]. ❏ Activating the security function You can activate the security function to protect your receiver system against theft. 1 Display the setting screen. On the Home screen: • Press [ ] repeatedly to change the page on the menu screen. To deactivate the security function: Select [OFF] for . Clock settings 1 Display the Home screen. On the monitor panel: DDX793/DDX773BH DDX593/DDX573BH/ DDX416BT/DDX393/ DDX373BT/DDX23BT 2 Display the setting screen. 3 Set the clock time. * Synchronizes the clock time with the connected navigation unit. FM RBDS. Sets the clock manually. (See below.) When selecting : Adjust the hour (1), then adjust the minute (2). • Press [Reset] to set the minute to "00". 2 The security indicator on the monitor panel flashes when the vehicle ignition is off. 4 Finish the procedure. • You can also display the setting screen by touching the clock area on the Home screen. * Only for DDX416BT: Appears only when a navigation unit is connected. ENGLISH 5