Kenwood DDX7015BT Operation Manual 1 - Page 36
Displaying the picture from the rear, view camera, Using the parking guidelines
![]() |
View all Kenwood DDX7015BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
OTHER EXTERNAL COMPONENTS R Displaying the picture from the rear view camera The rear view screen is displayed when you shift the gear to the reverse (R) position. • To erase the caution message, touch the screen. To display the picture from the rear view camera manually DDX7015BT/DDX7015BTM*1 *1 This operation works only when is set to [R-CAM]. (Page 57) *2 This operation works only when is set to [R-CAM]. (Page 57) *3 This operation works only when is set to [R-CAM]. (Page 57) R Using the parking guidelines You can display parking guidelines to enable easier parking when you shift the gear to the reverse (R) position. Displaying the parking guidelines 1 Display the setting screen. On the screen: Adjusting the parking guidelines Adjust the parking guidelines according to the size of the car, parking space and so on. • Install the rear view camera in the appropriate position according to the instructions supplied with the rear view camera. • When adjusting the parking guidelines, make sure to use the parking brake to prevent the car from moving. 1 Display the setting screen. (See the left column). • Press [K] repeatedly to change the page on the menu screen. 2 DDX5015DAB/DDX5015BT/ (Hold) DDX515BT/DDX515BTM*2 (Hold) DDX715WBT/DDX715WBTM*3 (Hold) • When displaying the picture from the rear view camera manually, you can change the picture settings using [Aspect]/[PictureAdjust]. (Page 50) To exit the rear view screen: Press and hold the same button again. 36 • Press [K] repeatedly to change the page on the menu screen. 2 To deactivate: Select [OFF] for . 3 Adjust the parking guidelines by selecting the mark (1), then adjusting the position of the selected mark (2). Make sure that A and B are horizontally parallel, and that C and D are the same length. • Press and hold [Initialize ] for 2 seconds to set all the marks to the initial default position.
![](/manual_guide/products/kenwood-ddx5015bt-operation-manual-a3f8394/36.png)