Kenwood DDX7015BT Operation Manual 1 - Page 64

CONNECTION/INSTALLATION R Connecting wires to terminals (DDX715WBT/DDX715WBTM) USB terminal (0.8 m): Pages 65 - 66 Page 66 6 Page 67 Pages 65 - 66 $ $ $ Connect to the vehicle's steering remote harness. • Depending on the type of vehicle, it cannot be connected. Connector C Page 66 Purple with white stripe (Reverse sensor wire) Connect to the vehicle's reverse lamp harness when using the optional rear view camera. Connect the antenna cord to the antenna terminal. 1 Light green (Parking sensor wire) 3 10 A fuse Connect to the vehicle's parking brake detection switch harness. • For best safety, be sure to connect the parking sensor. * Blue with white stripe (Power control wire) Brown (Mute control wire) When using the optional power amplifier, connect to its power control terminal. Not used. Connector B Connect to vehicle's harness. Connector A Connect to vehicle's harness. Pin Color and functions of Connector A, B, and C A1 Orange/White Dimmer A2 Yellow Battery A4 Red Ignition (ACC) A5 Blue Antenna control A6 Black Ground connection A8/A7 White ª / White/Black · Left speaker (front) A10/A9 Gray ª / Gray/Black · Right speaker (front) B2/B1 Green ª / Green/Black · Left speaker (rear) B6/B5 Purple ª / Purple/Black · Right speaker (rear) C6 Gray/Red Ground C7 Light green/Red Input 1 C8 Purple/Red Input 2 * If no connections are made, do not let the cable come out from the tab. 64