Kenwood DDX7015BT Operation Manual 1 - Page 69
<Antenna Power>
View all Kenwood DDX7015BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
CONNECTION/INSTALLATION 4 Rub the film antenna (0) gently in the direction of the arrow shown below to firmly stick it to the windscreen. 5 Remove the second sheet (tag 2) on the film antenna (0) vertically. Sheet (tag 2) 6 Match the protrusions of the amplifier unit (-) with the H markings on the film antenna (0) and attach the amplifier. Do not touch the lead terminal or the adhesive side of the amplifier unit (-). When installing the antenna on the right side Earth sheet 7 Remove the film covering the earth sheet and attach the earth sheet to the metal part of the vehicle. Provide sufficient space for the earth sheet so that it does not obstruct the interior parts (front pillar cover). Also take care that the interior parts do not obstruct the amplifier unit (-). Windscreen Earth sheet Match the protrusion with the H mark Front pillar cover Lead terminal of the film antenna (0) Lead contact of the amplifier unit (metal part) When installing the antenna on the left side Earth sheet 8 Wire the antenna cable. Use cable clampers (=) to secure the antenna cable to the pillar in several places. 9 Reattach the front pillar cover. Be sure not to damage the earth sheet and amplifier unit (-) when reattaching. 10 Connect the amplifier unit (-) to the DAB input terminal on the rear of the unit. 11 Set to [ON]. (Page 34) ENGLISH 69