Kenwood DDX7015BT Operation Manual 1 - Page 63
Connection
View all Kenwood DDX7015BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
CONNECTION/INSTALLATION Connection R Connecting wires to terminals (DDX7015BT/DDX7015BTM/DDX5015BT/DDX5015DAB/DDX515BT/DDX515BTM) USB terminal (0.8 m): Pages 65 - 66 6 Pages 65 - 66 Page 67 Pages 65 - 66 Connect to the vehicle's steering remote harness. Contact your Kenwood dealer for details. Page 66 Purple with white stripe (Reverse sensor wire) Connect to the vehicle's reverse lamp harness when using the optional rear view camera. Connect the antenna cord to the antenna terminal. 1 White ª / White with black stripe · : To front speaker (left) Gray ª / Gray with black stripe · : To front speaker (right) Green ª / Green with black stripe · : To rear speaker (left) Purple ª / Purple with black stripe · : To rear speaker (right) Blue (Antenna control wire) Light green (Parking sensor wire) 3 10 A fuse Connect to the vehicle's parking brake detection switch harness. • For best safety, be sure to connect the parking sensor. * If no connections are made, do not let the cable come out from the tab. * Depending on what antenna you are using, connect either to the control terminal of the motor antenna, or to the power terminal for the booster amplifier of the film-type antenna. (Max. 300 mA, 12 V) Blue with white stripe (Power control wire) When using the optional power amplifier, connect to its power control terminal. Brown (Mute control wire) Light blue with yellow stripe (Steering remote control wire) Not used. To use the steering wheel remote control feature, an exclusive remote adapter (not supplied) matching your car is required. Orange with white stripe (Dimmer control wire) Red (Ignition wire) Yellow (Battery wire) Black (Ground wire) (ACC) (BATT) (GND) To car light control switch To car chassis Ignition key switch Fuse box Battery ENGLISH 63