Kenwood DNX571HD User Manual 3 - Page 21
Removing the trim plate, Removing the unit
View all Kenwood DNX571HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
ÑÑRemoving the trim plate 1) Engage the catch pins on the extraction key (accessory4) and remove the two locks on the lower level. Lower the trim plate (accessory9) and pull it forward as shown in the figure. 9 4 ÑÑRemoving the unit 1) Remove the trim plate by referring to step 1 in "Removing the trim plate". 2) Insert the two extraction key (accessory4) deeply into the slots on each side, as shown. 4 Catch Lock ✎✎NOTE • The trim plate can be removed from the top side in the same manner. 2) When the lower level is removed, remove the upper two locations. 3) Lower the extraction key toward the bottom, and pull out the unit halfway while pressing towards the inside. ✎✎NOTE • Be careful to avoid injury from the catch pins on the extraction key. 4) Pull the unit all the way out with your hands, being careful not to drop it. English ñ 21