Kenwood DNX571HD User Manual 3 - Page 4

ÑÑAcquiring GPS signal The first time you turn on this unit, you must wait while the system acquires satellite signals for the first time. This process could take up to several minutes. Make sure your vehicle is outdoors in an open area away from tall buildings and trees for fastest acquisition. After the system acquires satellites for the first time, it will acquire satellites quickly each time thereafter. ÑÑAbout the front panel DNX8 DNX7 When removing the product from the box or installing it, the front panel may be positioned at the angle shown in (Fig. 1). This is due to the characteristics of mechanism the product is equipped with. When the product is first powered on works properly, the front panel will automatically move into the position (initial setting angle) shown in (Fig. 2). ÑÑHow to reset your unit If the unit fails to operate properly, press the Reset button. The unit returns to the factory settings. DNX8 DNX7 DNX6 DNX5 (Fig. 1) (Fig. 2) ÑÑCleaning the Unit If the front panel of this unit is stained, wipe it with a dry soft cloth such as a silicon cloth. If the front panel is stained badly, wipe the stain off with a cloth moistened with neutral cleaner, then wipe it again with a clean soft dry cloth. !!CAUTION • Applying spray cleaner directly to the unit may affect its mechanical parts. Wiping the front panel with a hard cloth or using a volatile liquid such as thinner or alcohol may scratch the surface or erase screened print. ✎✎NOTE • Disconnect the USB device before pressing the button. Pressing the button with the USB device connected can damage the data stored in the USB device. For how to disconnect the USB device, see How to Play Music (P.13). • When the unit is turned on after resetting, the Initial SETUP screen appears. See First Step (P.6). 4 ñ English