Kenwood DRV-410 Operation Manual - Page 16
Before Using the Driving Support Function
View all Kenwood DRV-410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Before Using the Driving Support Function Adjusting the Settings to Match the Vehicle Before using the driving support function, set the mounting height of the device from the road surface and adjust the horizon and bonnet front edge position settings to match the vehicle. 1. Press the [MENU/OK] button. MENU appears. 5. Use the [J]/[K] buttons to select and then press the [MENU/OK] button. 1 2 2. Use the [J]/[K] buttons to select and then press the [MENU/OK] button. 1 6. Press the [MENU/OK] button, use the [J]/[K] buttons to align the guide line with the horizon, and then press the [MENU/OK] button. Adjust as shown in the figure. 2 13 1 2 1 3. Use the [J]/[K] buttons to select and then press the [MENU/OK] button. 2 7. Press the [MENU/OK] button, use the [J]/[K] buttons to align the guide line with the bonnet front edge, and then press the [MENU/OK] button. Adjust as shown in the figure. 2 1 13 2 1 4. Use the [J]/[K] buttons to select the mounting height from the road surface and then press the [MENU/OK] button. 1 2 1 12 2 8. Hold down the [ end the procedure. ] button to • For the mounting height setting, set the nearest height among the setting options. • In the case of a vehicle for which the bonnet front edge cannot be seen, lower the guide line to the lowest position at which the center of the road surface is not hidden by the body or a part of the vehicle and then set the setting. • The driving support function is set to "OFF" by default (ÁP.21).