Kenwood DRV-830 Operation Manual - Page 11

Recording when the power is

Page 11 highlights

Before Using 5. Operate the [ ] and [ ] buttons to select , then press the [MENU/ OK] button. The SD card is formatted. 1 2 1 6. Press the [MENU/OK] button to complete the adjustment. 20 Recording when the power is on continuous recording When the camera's power turns on, continuous recording starts. z The maximum recording time for continuous recording depends on the resolution setting. The resolution is set to "1920×1080 (HDR)" upon purchase. (➜ P. 46) z During continuous recording, the video is split and stored in files of a set time. The recording time per file can be selected from among 1 minute (the setting upon purchase), 3 minutes and 5 minutes. (➜ P. 33) z During continuous recording, when there is no more recordable space on the SD card, the files are overwritten, starting from the oldest files. z If an SD card is inserted in SD card slot 2, when there is no more recordable space on the SD card in SD card slot 1, continuous recording switches to SD card slot 2 and recording continues. z When there is no more recordable space on the SD card in SD card slot 2, continuous recording switches to SD card slot 1 and recording continues. The recorded files on the SD card in SD card slot 1 are overwritten, starting from the oldest files, and continuous recording continues. Recorded file storage location z Recorded files are stored in the "NORMAL" folder on the SD card. (➜ P. 45) Event recording When a sudden impact, etc., is detected during continuous recording, continuous recording is interrupted and event recording starts. When event recording ends, continuous recording resumes. z The recording time for event recording is the 10 seconds before the impact was detected and a set time after the impact was detected, selectable among 15 seconds (the setting upon purchase), 30 seconds and 1 minute. (➜ P. 33) z If another impact is detected before event recording ends, event recording is extended from there for the set amount of time. The maximum recording time per file is 1 minute. When the recording time reaches 1 minute, the file is split and recording starts on a new file. z The sensitivity for detectAinpgpimr opxa. c3ts cmaiAnnpbupet resosext.. (➜3 mP.Ai3np3up)tr eosx . 3 ・m i・n u ・t e s・・ Impact detection Continuous recording Continuous recording Event recording 10 seconds before impact recorded 15 seconds after impact recorded zzUpon purchase, overwriting is set to "OFF". When the upper limit of the recordable number of files is reached, event recording is no longer possible. Recorded file storage location z The files are stored in the "EVENT" folder on the SD card. (➜ P. 45) A p p r o x . 3 mAipnpurtoe xs . 3 m Ai npuptreosx . 3 m・i n ・u t e・s ・・ 21 Overwrite Overwrite

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25

Before Using
5.
Operate the [
] and [
] buttons to
select <OK>, then press the [MENU/
OK] button.
The SD card is formatted.
2
1
1
6.
Press the [MENU/OK] button to complete
the adjustment.
Recording when the power is on
continuous recording
When the camera's power turns on,
continuous
recording starts.
z
The maximum recording time for continuous recording depends on the resolution setting. The resolution
is set to “1920×1080 (HDR)” upon purchase.
(
P. 46)
z
During continuous recording, the video is split and stored in files of a set time. The recording time per file
can be selected from among 1 minute (the setting upon purchase), 3 minutes and 5 minutes.
(
P. 33)
z
During continuous recording, when there is no more recordable space on the SD card, the files are
overwritten, starting from the oldest files.
z
If an SD card is inserted in SD card slot 2, when there is no more recordable space on the SD card in SD
card slot 1, continuous recording switches to SD card slot 2 and recording continues.
z
When there is no more recordable space on the SD card in SD card slot 2, continuous recording switches to
SD card slot 1 and recording continues. The recorded files on the SD card in SD card slot 1 are overwritten,
starting from the oldest files, and continuous recording continues.
Recorded file storage location
z
Recorded files are stored in the
“NORMAL”
folder on the SD card.
(
P. 45)
Event recording
When a sudden impact, etc., is detected during
continuous
recording,
continuous
recording is interrupted
and event recording starts. When event recording ends,
continuous
recording resumes.
z
The recording time for event recording is the 10 seconds before the impact was detected and a set time
after the impact was detected, selectable among 15 seconds (the setting upon purchase), 30 seconds
and 1 minute.
(
P. 33)
z
If another impact is detected before event recording ends, event recording is extended from there for the
set amount of time. The maximum recording time per file is 1 minute. When the recording time reaches
1 minute, the file is split and recording starts on a new file.
z
The sensitivity for detecting impacts can be set.
(
P. 33)
Continuous recording
Continuous recording
Impact detection
10 seconds before impact recorded
Event recording
15 seconds after impact recorded
z
Upon purchase, overwriting is set to “OFF”. When the upper limit of the recordable number of
files is reached, event recording is no longer possible.
Recorded file storage location
z
The files are stored in the
“EVENT”
folder on the SD card.
(
P. 45)
21
20