Kenwood DRV-A501W Operation Manual - Page 24
Kenwood DRV-A501W Manual
View all Kenwood DRV-A501W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
- Select the Speed Unit Select Speed Units MPH KMH Press OK to continue. - Set Wireless Link Password Set Wireless Link Password 1 2 3 4 5 6 7 8 Press OK to continue. TIP: You can reset the settings either by operating inside of the SETUP MENU, or by restoring defaults. You can switch the capitalization by Protect button when you set the Wireless Link password. From now on, the device will automatically turn on and start recording once power has been made available from the 12 V outlet. Just start the vehicle and start driving! - If there is no 12 V outlet or cigar lighter socket for your vehicle, use the included USB power cord. - DO NOT wire the device directly to the car cigar lighter socket or any 12 V outlet. Doing so will result in permanent damage to the device. - The device has a hardwire kit CA-DR1030(optional accessory) that will directly connect to your vehicle's fuse box. This will allow you to have your 12 V outlet available for other use. Please read carefully and follow the instructions below to help you operate the device safely. 21