Kenwood KCA-BT300 Instruction Manual - Page 10

Basic Operation of hands-free phoning (Model-C) Before Use • You need to register your cell-phone before using it with this unit. For more details, see (page 20). • If you have registered two or more cell-phones, you need to select one of them. For more details, see (page 22). • To use the Phone Book, it must be downloaded to this unit in advance. For details, see (page 21). • For the method of operation in the Menu mode, refer to the Instruction Manual for Control Unit. • For more information regarding the function with [ ] mark, see (page 30). Making a call Dialing Method 1. Entry dialing method mode Press the [MUTE] button for at least 1 second. 2. Enter dialing method selection mode Turn the [VOL] knob to select "Dialing Mode", and then press the [ENTER] button. 3. Select a dialing method Press the [ENTER] button. "DIAL" » "INITIAL" » "P-BOOK" » "OUT-CALL" » "INCALL" » "MIS-CALL" 3 Methods of operations in the above modes are described below. 4. Exit the dialing method selection mode Press the [MUTE] button for at least 1 second. 3 Dial a number ( ) 2-1. Select the "DIAL" display. 2-2. Enter a phone number Operation type Select the characters Determine the characters. Delete the characters. Operation Turn the [VOL] knob. Press the [ ] button. Press the [ ] button. 2-3. Make a call Press the [ENTER] button on the remote controller. ☞ You can input max 32 digits. 3 Speed dialing (Preset dial) 2-1. Select the "DIAL" display. 2-2. Select the preset dial number Press the [1] - [6] button. 2-3. Make a call Press the [ENTER] button for at least 1 second. ☞ You need to register the preset dial number. (page 11) 10 | KCA-BT300 3 Calling a number in the call log ( ) 2-1. Select the "OUT-CALL" (outgoing call), "INCALL" (incoming call), or "MIS-CALL" (missed call) display. 2-2. Select a name or phone number Press the [u] or [d] button. 2-3. Make a call Press the [38] button for at least 1 second. 3 Calling a number in the Phone Book ( ) 2-1. Select the "INITIAL" display, proceed to step 2-2. Select the "P-BOOK" display, proceed to step 2-3. 2-2. Select the initial to be searched for Operation type Operation Move to the next Turn the [VOL] knob or press the [ ] or character. [ ] button. Move to the next row. Press the [u] or [d] button. Determine the selected initial. Press the [ENTER] button for at least 1 second. 2-3. Select the name Operation type Operation Move to the next Turn the [VOL] knob or press the [u] or phone number. [d] button. Move to the next Press the [ ] or [ ] button. name. 2-4. Make a call Press the [ENTER] button for at least 1 second. Make a voice dialing call 1. Enter Bluetooth menu mode Press the [MUTE] button for at least 1 second. 2. Enter voice dialing call mode Turn the [VOL] knob to select "Voice Recognize". 3. Press the [ENTER] button. "Ready?" is displayed. 4. Press the [ENTER] button. "PB Name?" is displayed. When a beep is heard, say the name within 2 seconds. 5. Press the [1] button. "PN Type?" is displayed. When a beep is heard, say the category within 2 seconds. 6. Make a call This step is the same as step 3 of the procedure in . You can make a call or select a category. ☞ If your voice cannot be recognized, a message is displayed. Pressing the [ENTER] button allows you to retry voice input. See page 34. ☞ Both the name and category requires registration of a voice tag. See page 22. ☞ Audio sound is not output during voice recognition.