Kenwood KCA-BT300 Instruction Manual - Page 33
Connection, Installation
View all Kenwood KCA-BT300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Connection Control Unit (5L connector) Control Unit (KAB connector) Accessory 4 (1.5 m, 5ft) Type Switch (page 4, 32) Installation Installation of the Microphone Unit 1 Check the installation position of the microphone (accessory 1). 2 Remove oil and other dirt from the installation surface. 3 Install the microphone. 4 Wire the microphone cable up to the hands-free box with it secured at several positions using tape or the like. Accessory 1 123 Accessory 1 (3 m, 9.5 ft) Connector for external device ⁄ • Only the terminal which has the same shape as that of the connector connected to the control unit can be used. • Only one external device can be connected. Fix a cable with a commercial item of tape. If You Want to Connect KCA-S220A Connect the Hands-Free Box to the terminal labelled TO CHANGER 2. Control Unit (5L) KCA-S220A TO HEAD UN T TO CHANGER 1 TO CHANGER 2 KCA-BT300 Peel the release coated paper of double-face adhesive tape to fix on the place shown above. Disc Changer ¤ • Please keep the total extension of the control cable from the control unit to the disc changer to 13 m (43 ft) or less. Control cable lengths in excess of 13 m will cease to function properly. Adjust the direction of the microphone to the driver. ⁄ • Install the microphone as far as possible from the cellphone. English | 33