Kenwood KMR-M506DAB Instruction Manual - Page 40
Installing the unit in-dash mounting, Removing the unit
View all Kenwood KMR-M506DAB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Installation/Connection Installing the unit (in-dash mounting) Removing the unit 1 Detach the faceplate. 2 Remove the trim plate. 3 Insert the extraction keys deeply into the slots on each side, then follow the arrows as shown on the illustration. Hook on the top side Orientate the trim plate as illustrated before fitting. 32 ENGLISH Do the required wiring. (Page 33) Dashboard of your car Bend the appropriate tabs to hold the sleeve firmly in place.
32
ENGLISH
Installing the unit (in-dash mounting)
Installation/Connection
Removing the unit
1
Detach the faceplate.
2
Remove the trim plate.
3
Insert the extraction keys deeply into the slots on each side, then
follow the arrows as shown on the illustration.
Do the required wiring.
(Page 33)
Bend the appropriate tabs to hold the
sleeve firmly in place.
Hook on the top side
Orientate the trim plate
as illustrated before
fitting.
Dashboard of
your car