Kenwood KMR-M506DAB Instruction Manual - Page 44
Antenna installation
View all Kenwood KMR-M506DAB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Installation/Connection Antenna installation 1 Remove the front pillar cover of your car. Front pillar 2 Clean the windscreen with the supplied cleaner (I). (I) 4 Rub the film antenna gently onto the windscreen in the direction of the arrow shown to allow it to stick firmly. 6 Set the position of the protrusion of the amplifier unit (G) with the K mark on the film antenna (F) and paste. Do not touch the lead terminal or the pasting surface (adhesive side) of the amplifier unit (G). • When installing the antenna on the right side Earth sheet Set the position of the protrusion with K mark - Wait until the glass surface is completely dry before proceeding. - Warm the surface of the windscreen with defroster if it is cold (during winter). 3 Remove the separator (tag 1) of film antenna (F) horizontally and paste the antenna on the windscreen. Separator (tag 1) 5 Remove the separator (tag 2) of film antenna (F) vertically. Separator (tag 2) Lead terminal of the film antenna (F) Lead contact of the amplifier unit (metal part) • When installing the antenna on the left side Earth sheet Do not touch the pasting surface (adhesive side) of the film antenna (F). 36 ENGLISH