Kenwood NX-200S Instruction Manual 1 - Page 26
Basic Operations
View all Kenwood NX-200S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
BASIC OPERATIONS SWITCHING POWER ON/OFF Turn the Power switch/ Volume control clockwise to switch the transceiver ON. Turn the Power switch/ Volume control counterclockwise fully to switch the transceiver OFF. ■ Transceiver Password (NX-200/ NX-300/ NX-200G/ NX-300G Only) If the transceiver is password protected, "PASSWORD" will appear on the display when the power is turned ON. To unlock the transceiver, enter the password: 1 Select a character using / . • On keypad models, you can enter the password directly. 2 Press to enter the selected character. • This step is unnecessary when using the keypad. 3 Repeat steps 1 and 2 to enter the entire password. • Press or # to delete a character. Press and hold or # to delete all characters. 4 Press or to confirm the entry. • If you enter an incorrect password, an error tone sounds and the transceiver remains locked. • The password can contain a maximum of 6 digits. ADJUSTING THE VOLUME Rotate the Power switch/ Volume control to adjust the volume. Clockwise increases the volume and counterclockwise decreases it. SELECTING A ZONE AND CHANNEL/GROUP ID Select the desired zone using the key programmed as Zone Select or Zone Up/Down. Each zone contains a group of channels. 12