Kenwood NX-200S Instruction Manual 1 - Page 42
VOX Operation
View all Kenwood NX-200S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
■ VOX Operation 1 Connect the headset to the transceiver. 2 Press and hold the key programmed as VOX for 2 seconds (NX-200/ NX-300/ NX-200G/ NX-300G Only). 3 To transmit, simply speak into the microphone. • The transceiver recognizes sound levels depending on the VOX Gain level. If it is too sensitive, it will transmit when there is noise in the background. If it is not sensitive enough, it will not pick up your voice when you begin speaking. 4 When you finish speaking, transmission ends. 5 To turn the VOX function OFF, press and hold the VOX key again, for 2 seconds (NX-200/ NX-200G/ NX-300/ NX-300G Only). Note: If a speaker/ microphone is connected to the transceiver while VOX is ON, and the VOX Gain Level is set to a sensitive level, louder received signals may cause the transceiver to transmit. 28