Kenwood NX-200S Instruction Manual 1 - Page 34
Alphanumeric 2-way Paging Function
![]() |
View all Kenwood NX-200S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
FleetSync: ALPHANUMERIC 2-WAY PAGING FUNCTION FleetSync is an Alphanumeric 2-way Paging Function, and is a protocol owned by JVC KENWOOD Corporation. Note: ◆ This function is available only in analog operation. ◆ Ask your dealer for further information regarding the NX-200S/ NX-300S. SELCALL (SELECTIVE CALLING) A Selcall is a voice call to a station or group of stations. ■ Transmitting (NX-200/ NX-300/ NX-200G/ NX-300G Only) 1 Select your desired zone and channel. 2 Press the key programmed as Selcall or Selcall + Status to enter Selcall mode. 3 Press / to select the station you want to call. • On keypad models, if Manual Dialing is enabled, you can directly enter the station ID. 4 Press the PTT switch and begin your conversation. ■ Receiving An alert tone will sound and the transceiver will enter Selcall mode. The calling station's ID will appear when a Selcall is received (NX-200/ NX-300/ NX-200G/ NX-300G Only). You can respond to the call by pressing the PTT switch and speaking into the microphone. ■ Identification Codes An ID code is a combination of a 3-digit Fleet number and a 4-digit ID number. Each transceiver has its own ID. • Enter a Fleet number (100 ~ 349) to make a group call. • Enter an ID number (1000 ~ 4999) to make an individual call in your fleet. • Enter a Fleet number to make a call to all units in the selected fleet (Fleet call). • Enter an ID number to make a call to the selected ID in all fleets (Supervisor call). 20
![](/manual_guide/products/kenwood-nx200-instruction-manual-f5be049/34.png)