Kenwood NX-200S Instruction Manual 1 - Page 3
Instruction Manual
View all Kenwood NX-200S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
VHF DIGITAL TRANSCEIVER UHF DIGITAL TRANSCEIVER NX-200 NX-200G NX-200S NX-300 NX-300G NX-300S INSTRUCTION MANUAL Terminal Descriptions Universal connector It is possible to use a resin-based cover for the Universal connector. No. Name I/O Description Impedance 1 SSW I Ext/Int Speaker Switch Input High Impedance 2 SP+ 3 SP- O BTL Output + for External Speaker 8 / 16 O BTL Output - for External Speaker 4 MSW I Ext/Int MIC Switch Input High Impedance 5 EMC I External MIC Input 1.8 k 6 ME - External MIC GND GND 7 PTT I External PTT Input High Impedance 8 PF I Programmable Function Key Input High Impedance 9 OPT I/O Man Down Input High Impedance 10 E − GND GND 11 5V O 5V power supply output 5 V 12 TXD O Serial Data Output CMOS 13 RXD I Serial Data Input CMOS 14 NC - Not used - Antenna Terminal 50 impedance Battery Terminal The battery terminal uses a spring plate. The negative terminal connects to the chassis ground. The battery is mounted on the rear side of the transceiver using a sliding mounting method.