Kenwood NX-200S Instruction Manual 1 - Page 33
Scan Revert, Scan Delete/add, Priority-channel Select
View all Kenwood NX-200S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
SCAN REVERT The Scan Revert channel is the channel selected when you press the PTT switch to transmit during scan. Your dealer can program one of the following types of Scan Revert channels: • Selected: The last channel selected before scan. • Selected + Talkback: Same as "Selected", plus you can respond to calls on the channel at which scan is paused. • Priority 1/ Priority 2: The Priority channel (either Priority 1 or Priority 2) . • Priority 1 + Talkback/ Priority2 + Talkback: Same as "Priority 1/ Priority 2", plus you can respond to calls on the channel at which scan is paused. • Last Called + Selected: The last channel on which you receive a call. SCAN DELETE/ADD You can add and remove zones and/or channels/group IDs to and from your scan list. 1 Select your desired zone and/or channel/group ID. 2 Press the key programmed as Zone Delete/Add (to add/ remove zones) or Scan Delete/Add (to add/remove channels/group IDs) (NX-200/ NX-200G/ NX-300/ NX-300G Only). • You can also press and hold the key programmed as Scan Delete/Add to add/remove zones. PRIORITY-CHANNEL SELECT (NX-200/ NX-300/ NX-200G/ NX-300G ONLY) If the Priority channel has been set as Operator Selectable by your dealer, you can reprogram the Priority channels. 1 Select your desired zone and channel/group ID. 2 Press the key programmed as Priority-channel Select. 3 Press / to select "NORMAL", "PRIORITY 1" ( ), "PRIORITY 2" ( ), or "PRIORITY 1&2" ( ). 4 Press to save the setting and exit. 19