Kenwood NX-200S Instruction Manual 1 - Page 27

Transmitting

Get Kenwood NX-200S PDF manuals and user guides View all Kenwood NX-200S manuals
Add to My Manuals
Save this manual to your list of manuals

Page 27 highlights

Select the desired channel/group ID using the Selector knob (default). Each channel/group ID is programmed with settings for transmitting and receiving. • You can toggle the display between the zone and channel/group ID names and number by pressing the key programmed as Display Format, or by accessing the Menu (NX-200/ NX-200G/ NX-300/ NX-300G Only) {page 15}. Note: If the default settings for / (NX-200/ NX-200G/ NX-300/ NX-300G Only) and the Selector knob have been changed, use the appropriate keys to select the zone and channel/group ID. TRANSMITTING 1 Select the desired zone and channel/group ID. 2 Press the key programmed as Monitor or Squelch Off to check whether or not the channel is free. • If the channel is busy, wait until it becomes free. 3 Press the PTT switch and speak into the microphone. Release the PTT switch to receive. • For best sound quality, hold the transceiver approximately 1.5 inches (3 ~ 4 cm) from your mouth. ■ Making Group Calls (Digital) (NX-200/ NX-300/ NX-200G/ NX-300G Only) If a key has been programmed with Group or Group + Status, you can select a group ID from the list to make a call to those parties on a Conventional channel. To select a group ID: 1 Press the key programmed as Group or Group + Status. 2 Press / to select a group ID/name from the list. 3 Press and hold the PTT switch to make the call. • Speak into the transceiver as you would during a normal transmission. 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
13
Select the desired channel/group ID using the Selector knob
(default).
Each channel/group ID is programmed with settings
for transmitting and receiving.
•
You can toggle the display between the zone and channel/group
ID names and number by pressing the key programmed as Display
Format, or by accessing the Menu (NX-200/ NX-200G/ NX-300/
NX-300G Only) {page 15}.
Note:
If the default settings for
/
(NX-200/ NX-200G/
NX-300/ NX-300G Only) and the Selector knob have been changed,
use the appropriate keys to select the zone and channel/group ID.
TRANSMITTING
1
Select the desired zone and channel/group ID.
2
Press the key programmed as
Monitor
or
Squelch Off
to
check whether or not the channel is free.
•
If the channel is busy, wait until it becomes free.
3
Press the
PTT
switch and speak into the microphone.
Release the
PTT
switch to receive.
•
For best sound quality, hold the transceiver approximately
1.5 inches (3 ~ 4 cm) from your mouth.
■
Making Group Calls (Digital)
(NX-200/ NX-300/ NX-200G/ NX-300G Only)
If a key has been programmed with
Group
or
Group +
Status
, you can select a group ID from the list to make a
call to those parties on a Conventional channel.
To select a group ID:
1
Press the key programmed as
Group
or
Group + Status
.
2
Press
/
to select a group ID/name from the list.
3
Press and hold the
PTT
switch to make the call.
•
Speak into the transceiver as you would during a normal
transmission.