Kenwood NX-200S Instruction Manual 1 - Page 28
Receiving
View all Kenwood NX-200S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
■ Making Individual Calls (Digital) (NX-200/ NX-300/ NX-200G/ NX-300G Only) If a key has been programmed with Individual or Individual + Status, you can make calls to specific persons. 1 Press the key programmed as Individual or Individual + Status. 2 Press / to select a unit ID from the list. • On keypad models, you can enter a unit ID directly. 3 Press and hold the PTT switch to make the call. • Speak into the transceiver as you would during a normal transmission. RECEIVING Select the desired zone and channel. If signaling has been programmed on the selected channel, you will hear a call only if the received signal matches your transceiver settings. Note: Signaling allows your transceiver to code your calls. This will prevent you from listening to unwanted calls. Refer to "SIGNALING" on page 26 for details. ■ Receiving Group Calls (Digital) When you receive a group call on a Conventional channel and the received group ID matches the ID set up on your transceiver, you can hear the caller's voice. When you receive a group call on a Trunking channel, the transceiver automatically switches to the communications channel to receive the call. ■ Receiving Individual Calls (Digital) When you receive an individual call, a ringing tone will sound and the caller's ID will appear on the display (NX-200/ NX-200G /NX-300/ NX-300G Only). To respond to the call, press and hold the PTT switch and speak into the transceiver as you would during a normal transmission. 14