Kenwood NX-200S Instruction Manual 1 - Page 36
Short/long Messages, Gps Report
View all Kenwood NX-200S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
■ Reviewing Messages in the Stack Memory (NX-200/ NX-300/ NX-200G/ NX-300G Only) 1 Press the key programmed as Stack, or press and hold the key programmed as Selcall, Status, or Selcall + Status to enter Stack mode. • The last received message is displayed. 2 Press / to select the desired message. • Message types are identified as follows: I: Caller ID, S: Status Message, M: Short Message • Press and hold for 1 second or press to cycle the display information as follows: ID Name > Status/Short Message > CH/GID > Time Stamp 3 Press to return to normal operation. • To delete the selected message, press or #. To confirm the deletion, press or . • To delete all messages, press and hold or # for 1 second. To confirm the deletion, press or . SHORT/LONG MESSAGES Received short messages are displayed the same as Status messages and are stored in the same stack memory (NX-200/ NX-300/ NX-200G/ NX-300G Only). To send and receive long messages, you must connect the transceiver to a PC. Ask your dealer for details. GPS REPORT GPS data can be manually transmitted by pressing the key programmed as Send the GPS data, or by accessing the Menu {page 15}. If set up by your dealer, GPS data may be automatically transmitted at a preset time interval. • When using the NX-200G/ NX-300G, you must first connect the VHF/ GPS antenna or UHF/ GPS antenna. • When using the NX-200/ NX-300/ NX-200S/ NX-300S, you must first connect an external GPS unit. 22