Kodak BC4601 Service Manual - Page 18
Replacing the LAMP SOCKET TERMINAL ASSEMBLY, Warning, Important, Caution - projector
UPC - 041771125318
View all Kodak BC4601 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
SERVICE MANUAL Replacing the LAMP SOCKET TERMINAL ASSEMBLY Style 1 LAMP SOCKET TERMINAL ASSEMBLY SCREW LAMP DOOR PLATE ASSEMBLY Warning Dangerous Voltage [1] Disconnect the main power. PROJECTOR LAMP LAMP EJECTOR LAMP SOCKET TERMINAL ASSEMBLY Important The EXTRA BRIGHT LAMP MODULE does not have a HEAT ABSORBING GLASS and has a LABEL on the LAMP DOOR. [2] Remove the LAMP MODULE. [3] Remove the PROJECTION LAMP from the LAMP MODULE. [4] Remove the SCREW from the LAMP DOOR PLATE ASSEMBLY. [5] Release the 2 TABS on the bottom side of the LAMP MODULE next to the LAMP MODULE DOOR. [6] Remove the LAMP DOOR PLATE ASSEMBLY. Caution Remove the CONDENSER LENS and HEAT ABSORBING GLASS and set the parts on a clean cloth. Do not set on a cold surface; this will cause damage to the parts. [7] Remove the LAMP EJECTOR. [8] Remove the LAMP SOCKET TERMINAL ASSEMBLY. TAB (2) CONDENSER LENS HEAT ABSORBING GLASS A091_0018CCA A091_0018CA Installing the LAMP SOCKET TERMINAL ASSEMBLY [1] Do the replacement procedure for the LAMP SOCKET TERMINAL ASSEMBLY in reverse order. 18 18NOV97 - SM5440-1