Kodak BC4601 Service Manual - Page 22
Remove the SPRING from the CLAMP LEVER on the LENS MOUNT BRACKET.
UPC - 041771125318
View all Kodak BC4601 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
SERVICE MANUAL [2] Do the replacement procedure for the LOWER HOUSING ASSEMBLY. [3] Remove the FOCUS KNOB. Important It is necessary to push the AUTO-FOCUS BRACKET backward and forward to allow access to the SCREWS on the LENS MOUNT ASSEMBLY. [4] Remove the 3 SCREWS from the LENS MOUNT ASSEMBLY. [5] Lift and remove the LENS MOUNT ASSEMBLY. [6] Remove the FOCUS SHAFT SPRING from the LENS MOUNT BRACKET. [7] Remote models only: Remove the SPRING from the CLAMP LEVER on the LENS MOUNT BRACKET. [8] Remove the SPRING from the PHOTOCELL BRACKET. [9] Remove the E-RING and SPACER from the FOCUS SHAFT ASSEMBLY. [10] Remove the SCREW from the LENS SUPPORT BRACKET. [11] Lift and remove the LENS SUPPORT BRACKET. [12] Remote models: Remove the AUTO-FOCUS SWITCH ASSEMBLY. [13] Remote models: Remove the SCREW from the RACK SOLENOID ASSEMBLY. [14] Remote models: Remove the RACK SOLENOID ASSEMBLY and PLUNGER. [15] Remote models: Remove the SCREW from the FOCUS MOTOR BRACKET ASSEMBLY. [16] Remove the FOCUS MOTOR BRACKET ASSEMBLY. [17] Push the RACK LEVER away from the FOCUS SHAFT ASSEMBLY. [18] Remove the FOCUS SHAFT ASSEMBLY. CLAMP LEVER SPRING SCREW FOCUS SHAFT SPRING RACK LEVER (not shown) FOCUS SHAFT FOCUS MOTOR BRACKET SPACER E-RING PHOTOCELL BRACKET AUTO-FOCUS SPRING SWITCH ASSEMBLY SCREW RACK SOLENOID PLUNGER LENS SUPPORT BRACKET SCREW A091_4029HCA A091_4029HA 22 18NOV97 - SM5440-1