Kodak DX6490 User Manual - Page 105
Problem, Cause, Solution, Use Fill flash
UPC - 041778500286
View all Kodak DX6490 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
Problem Picture is too dark. Chapter 10 Cause Solution Flash is not on. Turn on the flash (page 26). Flash unit is not open. Slide the flash release button to open the flash unit (page 26). The subject is too far away for the flash to have an effect. Move so there is no more than 16.1 ft (4.9 m) between the camera and the subject in Wide; 13.8 ft (4.2 m) in Telephoto. The subject is in front Use Fill flash (page 26) or change of a bright light your position so light is not behind (backlit). the subject. Not enough light. Reposition the camera or subject for more available light. Use PASM mode to adjust the aperture or shutter speed (page 19). Auto exposure was not To take the best possible pictures, achieved. press the Shutter button half-way and hold. When the ready light glows green, press the Shutter button the rest of the way down to take the picture. 93