Konica Minolta AccurioPress 6120 IC-309m2 User Guide - Page 155
Restoring the settings for a default virtual printer, Removing a virtual printer
View all Konica Minolta AccurioPress 6120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 155 highlights
Restoring the settings for a default virtual printer 147 7. (Optional) Select the Override PPD parameters check box if you would like the virtual printer settings to override the parameters set in the PPD file. 8. (Optional) In the Comments box, type any comment regarding the virtual printer parameters. 9. Click Edit to change the job parameters of your new virtual printer. Note: If you don't edit the job parameters, the settings of the new virtual printer are taken from the printer on which it was based. 10. Click Save to save your changes in the job parameters window. 11. Click OK. The new printer appears in the virtual printer list. Restoring the settings for a default virtual printer Restore a default virtual printer's parameters to the factory settings. 1. From the Tools menu, select Resource Center. 2. In the Resource list, make sure that Virtual Printers is selected. 3. Select the default virtual printer whose settings you want to restore. 4. Click Restore Defaults. 5. When the Restore Virtual Printer message appears, click Yes. The factory settings for the virtual printer are restored. 6. Click Close. Removing a virtual printer The four default virtual printers cannot be deleted. 1. From the Tools menu, select Resource Center. 2. In the Resource list, make sure that Virtual Printers is selected. 3. From the virtual printer list, select the virtual printer that you want to delete, and then click Remove(-). 4. Click Yes.